15m (49ft) NVIDIA/Mellanox MFS1S50-H015V Compatible 200G QSFP56 to 2 x 100G QSFP56 InfiniBand HDR Active Optical Breakout Cable for Quantum Switches and ConnectX-6 HCA

15m (49ft) NVIDIA/Mellanox MFS1S50-H015V Compatible 200G QSFP56 to 2 x 100G QSFP56 InfiniBand HDR Active Optical Breakout Cable for Quantum Switches and ConnectX-6 HCA

596000 CFA


 5-Year Warranty
30-Day Returns
30-Day Exchange


Product Highlights

Qualified for InfiniBand NDR End-to-end Systems
Lowest-latency, Low Insertion Loss, Low Crosstalk, High-speed Interconnect
4x 50G-PAM4 to Dual 2x 50G-PAM4
100% Verified by the Original, Perfectly Compatible with NVIDIA QM8700 Devices
Minimum Bend Radius 30mm for Flexible Routing
Simplifies Patching and Offers a Cost-effective Way for Short Links
Compliant with QSFP56 MSA, IEEE 802.3

NVIDIA/Mellanox MFS1S50-H015V Compatible 200G QSFP56 to 2x 100G QSFP56 InfiniBand HDR AOC Breakout Cable (15-meter, Active, QSFP56 to 2x QSFP56)

The NVIDIA/Mellanox MFS1S50-H015V is an 200Gb/s QSFP56 to 2x100Gb/s QSFP56 InfiniBand HDR Active Optical splitter Cable. Using the Quad Small Form Factor Pluggable 56 (QSFP56) contains four high-speed electrical copper pairs, each operating at data rates of up to 50Gb/s. This cable is compliant with QSFP56 MSA (Multi-Source Agreement) and IEEE 802.3 standards.

AOCs enable higher port bandwidth, density and configurability at a low cost, and reduced power requirement in the data centers, used extensively in cloud and supercomputers. Additionally, AOCs are widely employed for connecting NVIDIA GPU-based systems to InfiniBand networks and InfiniBand storage fabrics.

AOC cables offer the low-cost, high-value proposition and increased reliability over connectorized transceivers. They are lighter, more flexible, allow greater airflow, and support longer distances when compared with DAC cables.


Note: The FS P/N is changed from Q-2Q56AO15 to QSFP-200G-2QAO15, but the product is the same. Only the FS P/N has been changed.

Specifications
NVIDIA/Mellanox InfiniBand Compatible
MFS1S50-H015V
Vendor Name
FS
Form Factor
QSFP56 to 2x QSFP56
Max Data Rate
200Gbps
Cable Length
15M(49ft)
Cable Type
OM3
Wavelength
850nm
Minimum Bend Radius
30mm
Transmitter Type
VCSEL
Receiver Type
PIN
Power Consumption
≤4.5W
Jacket Material
OFNP
CDR (Clock and Data Recovery)
TX & RX Built-in CDR
Modulation Format
PAM4
Commercial Temperature Range
0 to 70°C (32 to 158°F)
Protocols
IEEE 802.3, QSFP56 MSA, SFF-8024, SFF-8679, SFF-8665, and SFF-8636, InfiniBand HDR
Quality Certifications

Produits similaires

NVIDIA/Mellanox MMS4X00-NS Compatible 800GBASE 2 x DR4/DR8 OSFP Finned Top PAM4 1310nm 100m DOM Dual MPO-12/APC SMF InfiniBand NDR Optical Transceiver Module for Quantum-2 Switches

NVIDIA/Mellanox MMS4X00-NS Compatible 800GBASE 2 x DR4/DR8 OSFP Finned Top PAM4 1310nm 100m DOM Dual MPO-12/APC SMF InfiniBand NDR Optical Transceiver Module for Quantum-2 Switches

680000 CFA
Voir le produit
30m (98ft) NVIDIA/Mellanox MFA7U10-H030 Compatible 400G OSFP Finned Top to 2 x 200G QSFP56 InfiniBand HDR Active Optical Breakout Cable for Quantum-2 Switches and ConnectX-6 HCA

30m (98ft) NVIDIA/Mellanox MFA7U10-H030 Compatible 400G OSFP Finned Top to 2 x 200G QSFP56 InfiniBand HDR Active Optical Breakout Cable for Quantum-2 Switches and ConnectX-6 HCA

850000 CFA
Voir le produit
NVIDIA/Mellanox MMA1Z00-NS400 Compatible 400GBASE-SR4 QSFP112 PAM4 850nm 50m DOM MPO-12/APC MMF InfiniBand NDR Optical Transceiver Module for ConnectX-7 HCA

NVIDIA/Mellanox MMA1Z00-NS400 Compatible 400GBASE-SR4 QSFP112 PAM4 850nm 50m DOM MPO-12/APC MMF InfiniBand NDR Optical Transceiver Module for ConnectX-7 HCA

680000 CFA
Voir le produit
2m (7ft) NVIDIA/Mellanox MCP7Y10-N002 Compatible 800G OSFP Finned Top to 2 x 400G QSFP112 InfiniBand NDR Passive Direct Attach Copper Breakout Cable for Quantum-2 Switches and ConnectX-7 HCA

2m (7ft) NVIDIA/Mellanox MCP7Y10-N002 Compatible 800G OSFP Finned Top to 2 x 400G QSFP112 InfiniBand NDR Passive Direct Attach Copper Breakout Cable for Quantum-2 Switches and ConnectX-7 HCA

214000 CFA
Voir le produit